Portfolios
Water Treatment Plant Upgrade – Fox Creek, AB | QC/QA Services
Develop Inspection & Test Plans (ITPs) for mechanical, piping, and civil scopes. We do compaction testing, construction monitoring, quality control and quality assurance work. Support, equipment commissioning, and Alberta Environment compliance for turnover package readiness.
Medical Complex Upgrade and Parking lot construction, Camsrose, Alberta, Compaction testing and Construction monitoring
Develop Inspection & Test Plans for structural concrete (foundations, slabs), underground utilities, asphalt paving, and building systems. Oversee compaction testing, concrete cylinder breaks, and aggregate gradation per Alberta TIR standards. Manage NCRs, RFIs, and material certifications with full traceability. Complete line-and-grade checks, pavement coring verification, and site servicing commission for occupancy turnover.
RCMP Parking Lot near Kingsway Mall, Compaction testing and QC work
Perform in-situ density testing (nuclear gauge / sand cone) on subgrade, base, and asphalt layers per ASTM D6938 / D1556. Verify compaction meets specified proctor densities (typically 98–100% SPD for base, 95–97% for subgrade). Document lift thickness, moisture content, and gradation results with daily field reports. Issue NCRs for non-compliant areas and coordinate rework testing until specifications are met.
Telecommunication Tower Construction | Construction Monitoring & QC
Perform foundation inspection (concrete cylinders, rebar placement, anchor bolt template verification per tower manufacturer specs). Oversee tower steel erection — bolt torque verification, member alignment, and galvanizing coating inspection per CSA S37 / TIA-222 standards. Verify grounding systems (resistance readings per IEEE 80), antenna mounts, and cable tray installations. Document daily inspection reports, material certs, and NCRs, with final inspection and commissioning sign-off before RF handover.
Highway 97 Repair & Upgrade – Fort St. John, BC | Compaction Testing & QC
Perform in-situ density testing (nuclear gauge per ASTM D6938) on subgrade, granular base, and asphalt layers per BC MoTI specifications. Verify compaction achieves minimum 100% SPD for granular base and 95–97% for subgrade, with moisture control within OMC ±2%. Document lift thickness, gradation, and proof-roll results in daily field reports. Issue NCRs for soft spots or non-compliant areas and coordinate rework alongside paving and grading operations.
Conuma Resources – Tumbler Ridge, BC | QC Lab Work & Soil Testing
Performed quality control laboratory testing and soil evaluation services for mining operations at Conuma Resources in Tumbler Ridge, British Columbia. Conducted soil classification, moisture content, and compaction testing, analyzed laboratory results, maintained accurate documentation, and ensured compliance with project specifications and industry quality standards.
Apartment Complex Construction – Winterburn, Edmonton | Construction Monitoring & QC
Provided construction monitoring and quality control services for an apartment complex project in Winterburn, Edmonton. Conducted site inspections, verified compliance with engineering specifications and construction standards, monitored earthworks and concrete activities, documented field observations, and prepared reports to support quality assurance throughout the project.
Onsite Compaction Testing Edmonton, Alberta
Performed on-site compaction testing for earthworks and granular materials on construction projects in Edmonton, Alberta. Conducted field density tests to verify compliance with project specifications and engineering requirements, monitored soil compaction activities, documented test results, and provided quality assurance support to ensure stable and durable foundations for construction.
Onsite Concrete Testing, Edmonton, Alberta
Standards – Testing follows CSA A23.1/A23.2 conducted by CCIL-certified labs to ensure quality and durability.
Key Fresh Tests – Slump, air content (5–8% for freeze-thaw resistance), temperature, and unit weight at time of placement.
Strength Testing – Compressive cylinder tests at 7 and 28 days, typically targeting 32 MPa for sidewalks and flatwork.
Common Specs – Minimum 150 mm thick concrete with compacted granular sub-base; testing frequency of 1 set per 50–100 m³ per pour.
Onsite Compaction & Concrete Testing Commercial Plaza, Edmonton, Alberta
Performed on-site compaction testing for soil and granular base materials at a commercial plaza project in Edmonton, Alberta. Conducted concrete field testing, including slump, air content, and temperature measurements. Collected and monitored concrete cylinder samples for compressive strength testing. Prepared quality assurance reports to verify compliance with project specifications and industry standards.
Onsite Concrete Quality Testing Airport Kugluktuk, Nunavut
Performed on-site concrete quality testing for airport infrastructure projects in Kugluktuk, Nunavut. Conducted field testing including slump, air content, and temperature measurements, collected and monitored concrete samples for compressive strength evaluation, ensured compliance with project specifications, and maintained accurate quality control records to support safe and durable construction.
Onsite Concrete Quality Test (Side Walk) North Edmonton, Alberta
Performed on-site concrete quality testing for sidewalk construction projects in North Edmonton, Alberta. Conducted field tests including slump, air content, and temperature measurements, collected concrete samples for strength testing, verified compliance with project specifications, and prepared quality control documentation to support durable and high-quality concrete installations.
